Electrical Panel Inspection & Replacement Bay Area's #1 Choice
Call: (408) 539-6936What this service covers
Electrical panel service assesses or replaces the equipment that distributes electricity to your home’s circuits.
Need electrical panel inspection & replacement bay area's #1 choice?
Tell us what your home needs. Call to discuss the service and the next available visit.
Electrical Panel Inspection & Replacement Bay Area's #1 Choice: What to Know
Electrical panel service assesses or replaces the equipment that distributes electricity to your home’s circuits. The sections below explain how to evaluate the proposed scope before booking a visit.
How Is the Work Assessed?
Describe the affected circuit, equipment, or planned upgrade. An assessment of the existing electrical system helps establish the work required. Ask what permit or utility coordination applies to the project.
United HVAC, Plumbing & Electrical provides electrical panel inspection and panel upgrade service to homeowners across the Bay Area, from San Jose to Palo Alto. Our licensed electricians inspect existing panels for safety and capacity issues, and handle full panel replacements - most commonly swapping an old 100-amp panel for a new 200-amp panel to support EV chargers and other higher-demand devices.
What Is an Electrical Panel Inspection and When Does the Panel Need to Be Replaced?
An electrical panel inspection evaluates the condition of the panel and its connections. The electrician also assesses whether its capacity is appropriate for the electrical demand being discussed. Replacement, which we typically call a panel upgrade, becomes necessary when the panel is an older 100-amp unit that can’t support new loads like an EV charger or heat pump, or when the panel itself is a known hazard, such as a Federal Pacific Stab-Lok or Zinsco unit.
What a Licensed Electrician Checks During a Panel Inspection
During an inspection, we use thermal imaging to spot hot spots at breaker connections before they become a failure point, and torque test breaker terminals to confirm they’re tightened to spec rather than loosened from age or vibration. We also run a load calculation to determine whether the panel’s rated amperage can actually support the home’s current and planned electrical demand, including any EV charger or major appliance additions.
Signs Your Electrical Panel Is Outdated or Hazardous
A panel branded Federal Pacific Stab-Lok or Zinsco is a known fire hazard regardless of its current condition, and we recommend replacement on sight in older homes across Sunnyvale and Campbell where these brands are still common from 1960s and ’70s construction. Other warning signs include breakers that trip repeatedly without an obvious cause, warm or discolored panel covers, a persistent burning smell near the panel, or a 100-amp rating that can’t accommodate an EV charger or induction range you’re planning to add.
Electrical Panel Replacement: How the Process Works
Panel replacement starts with a load calculation and permit application, followed by equipment selection based on the home’s amperage needs, and finishes with a coordinated replacement day that typically requires a brief power shutoff. Most homeowners are without power for a few hours during the swap, not the full day.
Load Calculation, Permit, and Equipment Selection
We calculate the home’s total electrical load, factoring in HVAC, EV charging, and any planned additions, to determine whether a 200-amp panel meets the need or whether a larger service is warranted. Every panel upgrade requires a permit from the city’s authority having jurisdiction, and requirements vary - a panel upgrade in Belmont may have different inspection scheduling than one in Cupertino, so we handle the permit filing and coordinate the inspection directly.
What Happens on Replacement Day
On replacement day, we coordinate with PG&E to schedule the temporary power disconnect, remove the old panel, and install the new 200-amp panel along with any required grounding and bonding upgrades to meet current Title 24 and code requirements. The vast majority of Bay Area homes we work on have an overhead service drop from PG&E, and we keep that overhead connection during the upgrade in almost every case, since converting to an underground service lateral adds substantial trenching and utility coordination cost that isn’t necessary for a standard panel swap.
Electrical Panel Inspection & Replacement Cost in the Bay Area
Electrical panel inspection and replacement cost depends primarily on whether the job is an inspection alone or a full panel upgrade, and on the amperage jump involved. A 100-amp to 200-amp upgrade is our most common job and falls within a predictable range once the load calculation and permit scope are known.
Factors That Affect the Final Price
Price is driven by the new panel’s amperage rating, whether the meter base also needs replacement, how much rewiring is required to bring grounding and bonding up to current code, and city-specific permit fees. Homes in Saratoga and Palo Alto with older subpanels or knob-and-tube remnants sometimes require additional code-required updates beyond the panel itself, which affects the final scope.
When an Inspection Is Enough vs. When Full Replacement Is Required
An inspection alone is enough when the panel is a modern brand in good condition and simply needs verification for the following.
- a home sale
- permit
- insurance requirement
A replacement recommendation should follow an electrical assessment. The electrician should explain the identified condition and why a repair would not adequately address the proposed scope.
Why Bay Area Homeowners Choose United HVAC, Plumbing & Electrical for Panel Work
Homeowners choose us because we handle the entire panel upgrade process - inspection, load calculation, permitting, and installation - under one license, without subcontracting pieces of the job out. Every quote reflects the actual amperage and code work the home needs, not a generic flat number.
Licensed Local Professionals
Our electricians are trained for panel work across the Bay Area and carry insurance that covers the property during the temporary power shutoff and panel swap. That matters because panel replacement involves working directly at the service entrance, and any complication during that window is covered rather than billed back to the homeowner.
25+ Years Serving Bay Area Homeowners
Our electricians and supervisors spent more than 25 years on electrical and heat pump-related upgrades across San Jose, Campbell, and the surrounding cities, which includes a steady volume of 100-amp to 200-amp panel upgrades tied to EV charger installs and heat pump conversions. That history means we know which cities’ AHJs move fast on panel permits and which ones require extra lead time for inspection scheduling.
Upfront Pricing and Same-Day Availability
Every panel inspection or replacement is quoted as a flat price after the load calculation, not an estimate that changes once the panel is opened up. If a component we installed during the upgrade fails within the guarantee period, we return and correct it at no additional labor charge.
Running an older 100-amp panel that can’t support an EV charger or new appliances? Call United HVAC, Plumbing & Electrical at (408) 539-6936 for a panel inspection or a same-day 200-amp panel upgrade quote anywhere in the Bay Area.
Preparing for Your Service Visit
Provide the equipment model if the project involves a new device. Tell the team about access to the electrical panel. Any planned interruption to power should be discussed before work begins.
After the Work Is Completed
Ask which circuits or equipment were affected by the completed work. Keep the project documents and any applicable inspection record. Report a recurring fault rather than repeatedly attempting to reset or bypass it.
Planning the Timing of the Work
A diagnosis visit is not always the same as a completed installation. Ask the team what can be established during the initial appointment. If additional work is recommended, confirm the expected sequence before arranging access to your home. Do not assume that an advertised service area guarantees an immediate appointment.
What Affects the Estimate?
The existing system and the extent of the work affect the estimate. Access to the equipment can also change the scope. Ask what the proposed scope includes and discuss any changes before approving additional work.
Why choose United?
Fully Licensed & Insured
California Contractor License #1061226. Bonded and insured with $2 million in coverage.
Projects Completed
Over 14,000 completed projects for Bay Area homeowners since 2019.
Five-Star Reviews
7+ years of experience, with customer feedback across Google, Yelp, and Facebook.
Workmanship Coverage
Labor coverage depends on the work performed. Review our warranty details for small jobs and major projects.
Warranty DetailsCommon questions
Will a panel upgrade increase my home's power capacity?
Yes, upgrading from a 100-amp to a 200-amp panel roughly doubles the home's available electrical capacity, which is typically what's needed to add an EV charger, a heat pump, or an induction range without overloading the system. The exact capacity gain depends on the panel size selected and the load calculation for your specific home.
What is the difference between a main breaker and a sub-panel?
A main panel is the primary point where power enters the home from the utility connection and distributes to all circuits, while a sub-panel is a secondary panel fed from the main panel to extend circuits to a specific area, like a garage or an addition. A panel upgrade typically replaces the main panel, though a sub-panel may be added afterward if additional circuit capacity is needed in a specific location.
Why do I need to move my panel out of the closet or bathroom?
Current electrical code requires clearance around a panel for safe access and prohibits panels in bathrooms due to moisture exposure risk, so a panel located in either spot typically needs to be relocated during a replacement. This is a common code-driven change we run into in older Bay Area homes where panels were originally installed in tight closets.
Do new panels come with built-in surge protection?
Many new panels can be fitted with a whole-home surge protection device installed at the panel during the upgrade, though it's typically an added component rather than a standard built-in feature. We can include one as part of the replacement if you want protection for electronics and appliances throughout the home.
Can I just replace the individual breakers instead of the whole panel?
Sometimes, if the panel itself is in good condition and only one or two breakers have failed, replacing just those breakers is a reasonable fix. But if the panel is a Federal Pacific Stab-Lok, Zinsco, or similar hazardous brand, or if the amperage rating itself is the problem, replacing individual breakers doesn't resolve the underlying issue and a full panel upgrade is the appropriate fix.
Do you provide 24/7 emergency service for panel failures?
Yes, we provide emergency response for panel failures that leave a home without power or present an active safety hazard. A complete panel upgrade is still typically scheduled during regular hours once the immediate hazard is addressed, since it involves a coordinated power shutoff and permit process.
How much does electrical panel service cost in the Bay Area?
The estimate depends on the condition of the existing system, access, equipment, and the agreed scope. Call United with the details of your project. Our team explains the proposed work and price before you approve it.
Where does United provide electrical panel service?
United serves homes in San Jose, Santa Clara, Sunnyvale, Cupertino, Campbell, and nearby South Bay and Peninsula communities. Check our service area page or call with your address to confirm coverage.
What should I prepare before a electrical panel service appointment?
Have the service address and a description of the problem ready. If available, share the equipment model, previous repair history, and any photos that help explain the issue. Tell the team about access restrictions when booking.
Will my electrical panel service project need a permit or inspection?
Permit and inspection requirements depend on the actual scope and local jurisdiction. Ask the team to explain the requirements that apply to your project and what coordination is included in the estimate.