SPAN Panel Installation in the Bay Area Bay Area's #1 Choice
Call: (408) 539-6936What this service covers
SPAN panel installation replaces a compatible home electrical panel with a smart panel that supports circuit-level monitoring and control.
Need span panel installation bay area's #1 choice?
Tell us what your home needs. Call to discuss the service and the next available visit.
SPAN Panel Installation in the Bay Area Bay Area's #1 Choice: What to Know
SPAN panel installation replaces a compatible home electrical panel with a smart panel that supports circuit-level monitoring and control. The sections below explain how to evaluate the proposed scope before booking a visit.
How Is the Work Assessed?
Describe the affected circuit, equipment, or planned upgrade. An assessment of the existing electrical system helps establish the work required. Ask what permit or utility coordination applies to the project.
United HVAC, Plumbing & Electrical is an authorized SPAN contractor providing SPAN panel installation to homeowners across the Bay Area, from San Jose to Palo Alto and Belmont. We install SPAN smart panels for homeowners adding an EV charger, solar, or battery storage who need circuit-level control and monitoring that a standard panel can’t provide.
What Is a SPAN Panel and How Is It Different from a Standard Electrical Panel?
A SPAN panel is a smart electrical panel with a 200-amp main breaker rating and capacity for up to 32 circuits, each individually controllable and monitored through the SPAN app. Unlike a standard panel, which simply distributes power without visibility into individual circuit usage, a SPAN panel gives the homeowner real-time data and remote control down to the circuit level.
What the SPAN Panel Does: Circuit-Level Control and Energy Monitoring
Every circuit connected to a SPAN panel reports its energy usage individually, so a homeowner can see exactly what a specific circuit - HVAC, EV charger, kitchen appliances - is drawing at any given moment, rather than only seeing total household usage. The app also lets homeowners remotely turn individual circuits on or off, which becomes particularly useful during a grid outage when managing which loads draw from a battery backup.
Who Needs a SPAN Panel
Homeowners electrifying their home with the following are the most common candidates, since SPAN integrates directly with these systems rather than treating them as separate add-ons to a standard panel.
- an EV charger
- solar panels
- battery storage
It’s also a practical upgrade for anyone in Los Altos or Saratoga who wants outage management with a battery system and wants to control exactly which circuits stay powered rather than running the whole house off limited battery capacity.
SPAN Panel Installation: How the Process Works
Installation starts with a site assessment and load calculation to confirm the home’s circuits and planned electrification needs, followed by permitting before any panel work begins. Once permitted, the existing panel is replaced with the SPAN unit and every circuit is re-terminated and mapped in the app.
Site Assessment, Load Calculation, and Permitting
We assess the home’s existing panel, circuit count, and any planned additions - the following - since a SPAN installation is sized around the home’s full electrification plan, not just its current load.
- an EV charger
- solar inverter
- battery
Permit requirements for smart panel replacements fall under NEC 2022 as adopted in California, and cities like Sunnyvale, Cupertino, and Mountain View each run their own AHJ review, so we file and coordinate that permit as part of the installation.
What Happens on Installation Day
On installation day, we disconnect and remove the existing panel, install the SPAN panel in its place, and re-terminate every circuit, labeling and mapping each one in the SPAN app before finishing. If the home has an EV charger, we confirm it has the dedicated 60-amp circuit SPAN requires for EV integration, and if solar or battery storage is part of the project, we verify compatibility with the inverter and battery model before commissioning the system.
SPAN Panel Installation Cost in the Bay Area
SPAN panel installation cost depends on whether it’s a straight panel replacement or includes integration with new solar, battery, or EV charging equipment installed at the same time. A standalone panel swap costs less than a project bundling SPAN with a new battery or solar interconnection.
Factors That Affect the Final Price
Price is driven by the number of circuits being mapped and re-terminated, whether the installation includes integration with a solar inverter such as Enphase or SolarEdge, a battery system like Tesla Powerwall or Enphase IQ Battery, or a dedicated EV charging circuit, and any PG&E interconnection work required for solar-tied systems. Homes in Belmont and Foster City with an existing solar system already interconnected with PG&E sometimes require additional coordination to integrate that system with the new SPAN panel.
Rebates and Incentives Available to Bay Area Homeowners
Some Bay Area utility and state electrification programs offer rebates that apply to smart panel upgrades when installed alongside qualifying solar, battery, or EV equipment, though eligibility depends on the specific program and equipment combination. We can identify which current incentives apply to your project during the site assessment, since rebate programs and their terms change periodically.
Why Bay Area Homeowners Choose United HVAC, Plumbing & Electrical for SPAN Panel Installation
Homeowners choose us because we’re an authorized SPAN contractor with direct experience integrating the panel with the solar, battery, and EV systems already common in Bay Area electrification projects. We handle the panel, the permitting, and the integration work as one project rather than passing pieces off to separate contractors.
Licensed Local Professionals
Our electricians are certified and trained for SPAN panel installation throughout the Bay Area and carry insurance that covers the property during the panel swap and circuit re-termination. That matters because a SPAN installation touches every circuit in the home, not just a single new addition.
Upfront Pricing and Same-Day Availability
Every SPAN panel installation is quoted as a flat price once the site assessment and circuit count are confirmed, not an estimate that grows once the panel is open. If a component we installed fails within the guarantee period, we return and correct it at no additional labor cost.
Electrifying your home with solar, a battery, or an EV charger and want circuit-level control? Call United HVAC, Plumbing & Electrical at (408) 539-6936 for a SPAN panel installation assessment anywhere in the Bay Area, from Los Gatos to Milpitas.
Understanding the Symptoms
Describe which part of the home is affected and when the fault occurs. Mention any recent appliance installation. Do not remove electrical covers or attempt live testing to gather information for the appointment.
Choosing the Appropriate Scope
A fault on one circuit does not automatically require a new panel. The electrician should explain where the problem was found and why the recommended work is appropriate. Capacity for a planned upgrade requires a separate assessment.
Preparing for Your Service Visit
Provide the equipment model if the project involves a new device. Tell the team about access to the electrical panel. Any planned interruption to power should be discussed before work begins.
After the Work Is Completed
Ask which circuits or equipment were affected by the completed work. Keep the project documents and any applicable inspection record. Report a recurring fault rather than repeatedly attempting to reset or bypass it.
Planning the Timing of the Work
A diagnosis visit is not always the same as a completed installation. Ask the team what can be established during the initial appointment. If additional work is recommended, confirm the expected sequence before arranging access to your home. Do not assume that an advertised service area guarantees an immediate appointment.
What Affects the Estimate?
The existing system and the extent of the work affect the estimate. Access to the equipment can also change the scope. Ask what the proposed scope includes and discuss any changes before approving additional work.
Why choose United?
Fully Licensed & Insured
California Contractor License #1061226. Bonded and insured with $2 million in coverage.
Projects Completed
Over 14,000 completed projects for Bay Area homeowners since 2019.
Five-Star Reviews
7+ years of experience, with customer feedback across Google, Yelp, and Facebook.
Workmanship Coverage
Labor coverage depends on the work performed. Review our warranty details for small jobs and major projects.
Warranty DetailsCommon questions
Can a SPAN panel replace my existing main electrical panel?
Yes, a SPAN panel is designed to replace your home's existing main panel, with a 200-amp main breaker rating and capacity for up to 32 individually monitored circuits. The installation involves re-terminating every existing circuit into the new panel, not just adding a separate unit alongside the old one.
How does the SPAN app work and what can I control from it?
The SPAN app shows real-time energy usage broken down by individual circuit and lets you remotely turn specific circuits on or off from your phone. This is particularly useful during an outage, when you can choose to keep essential circuits powered by a battery while turning off less critical loads.
Is a SPAN panel compatible with my EV charger and solar inverter?
Yes, SPAN integrates with major solar inverters including Enphase and SolarEdge, and with battery systems such as Tesla Powerwall and Enphase IQ Battery. EV charger integration requires a dedicated 60-amp circuit, which we confirm and install as part of the SPAN installation if it's not already in place.
Can SPAN help me manage power during a grid outage with a battery backup?
Yes, SPAN's circuit-level control is specifically useful for outage management, since it lets you prioritize which circuits draw from a connected battery instead of running the entire home off limited stored capacity. This typically extends how long a battery can support the home during an outage.
Does SPAN work with PG&E's time-of-use rate plans?
Yes, SPAN's circuit-level monitoring lets you see which loads run during peak PG&E rate periods, which is useful for identifying opportunities to shift usage - like EV charging or battery discharge timing - to off-peak hours. SPAN doesn't set your utility rate plan, but the visibility it provides helps homeowners make more informed decisions about when to run high-draw circuits.
Where does United provide SPAN panel installation?
United serves homes in San Jose, Santa Clara, Sunnyvale, Cupertino, Campbell, and nearby South Bay and Peninsula communities. Check our service area page or call with your address to confirm coverage.
What should I prepare before a SPAN panel installation appointment?
Have the service address and a description of the problem ready. If available, share the equipment model, previous repair history, and any photos that help explain the issue. Tell the team about access restrictions when booking.
Will my SPAN panel installation project need a permit or inspection?
Permit and inspection requirements depend on the actual scope and local jurisdiction. Ask the team to explain the requirements that apply to your project and what coordination is included in the estimate.
How do you decide the right scope for SPAN panel installation?
The team assesses the affected system and the symptoms before recommending a scope. Ask why a particular repair or replacement is proposed, what alternatives are relevant, and what work is included.
Can I request urgent SPAN panel installation in the Bay Area?
Call (408) 539-6936 to explain the problem and confirm current availability for your address. The team can discuss the next available visit; a particular arrival time is not guaranteed here.